Steel Grating

Theoretical weight calculation method of stainless steel grating

Various types of steel gratings are placed on the ground.

/Royce/ Wire Mesh Products Co., Ltd. introduces the theoretical weight calculation method of stainless steel grating

g/cm3, also known as 18/8 stainless steel in the industry . High temperature resistance of 800 degrees, good corrosion resistance, heat resistance, low temperature strength and mechanical properties; good hot workability such as stamping and bending, good processing performance, high toughness, no heat treatment hardening phenomenon (use temperature -196 ℃ ~800°C). It is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 18% chromium and more than 8% nickel. For 304 stainless steel, the ni element in its composition is very important, which directly determines the corrosion resistance of 304 stainless steel and its value.

Theoretical weight calculation method for stainless steel gratings

Series 3 (60mm spacing) gratings are specially designed for the mining industry The variety developed by the application, it solves the problem of mineral splashing on the board. This series of gratings has a nominal size of 50*60mm, which allows most of the splashing material to pass through, thus ensuring the clean and safe surface of the board. This product is often specified for the board surface in the crushing system. , the aisle on the conveyor line and the ball mill, the processing plant and the operation station, etc.

Theoretical weight calculation method of stainless steel grating

Galvanized grating is made of bearing flat steel and cross bars according to Orthogonal combination at a certain distance, open steel components fixed by welding or pressure locking; crossbars are generally made of twisted square steel, round steel or flat steel can also be used, and the materials are divided into carbon steel and stainless steel. The grid plate has strong production technology and broad market foundation, and the product quality is high, which has won the praise of the majority of customers. Here is the maintenance method of the grid plate: The grid plate fixed by bolts must be checked regularly. Whether the bolts are loose, and there are hidden dangers, deal with them in time. The welding place should pay attention to the protection of the galvanized layer. If the galvanized layer is found to be gone, it should be treated with anti-rust paint in time. It is necessary to keep it clean at ordinary times, and the grille plate should not be covered with all kinds of dirt, especially the residues of some corrosive items.

Each piece of steel grating is installed, it is necessary to install fasteners (the installation clips used for each steel grating shall not be less than 2) or be welded firmly, install one piece to fix the other , There is no fixed prohibition of standing people, and it is not allowed to remove temporary protection measures.

The above is the relevant introduction about the theoretical weight calculation method of stainless steel grating, I hope it will be helpful for you to buy stainless steel grating.

Inquiry for Our Product

Hongkong Royce Metal Products Co., Ltd.
E-mail: [email protected]

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Product List